PROGRAMMER ESP-P-WROOM32 FOR MODULES OF THE ESP32-WROOM-32 SERIES
The programmer enables, for example, saving your own program in the memory of the connected controller, or communication between the computer and the module via the USB port.
The interface is equipped with a dedicated place for the board, surrounded by spring pins. This solution ensures proper connection of the module pins with the goldpin connectors, at the same time allowing for secure, temporary assembly of the programmed module. An additional facilitation in programming and testing the module are the function buttons, thanks to which there is no need to manually short-circuit the appropriate pins of the module.
The programmer is powered from the USB port and does not require an external power supply.
local_shipping FREE shipping on orders over 90.00 € and up to 2.0 Kgr. Details
The programmer enables, for example, saving your own program in the memory of the connected controller, or communication between the computer and the module via the USB port.
The interface is equipped with a dedicated place for the board, surrounded by spring pins. This solution ensures proper connection of the module pins with the goldpin connectors, at the same time allowing for secure, temporary assembly of the programmed module. An additional facilitation in programming and testing the module are the function buttons, thanks to which there is no need to manually short-circuit the appropriate pins of the module.
The programmer is powered from the USB port and does not require an external power supply.
SPECIFICATION
Compatibility: ESP32-WROOM-32
Connectors type: 1 x micro USB socket, Place of temporary installation of the board with spring pins
42 x goldpin plug - Leading out the pins
Output signal level: 3.3 V
Power output: 3.3 V, 5 V
Main features: ON/OFF button, RESET button, PROGRAM button
Power supply: 5 V - from USB port
Weight: 0.02 kg
Dimensions: 50 x 47 x 15 mm