ARDUINO - ARCADE

1-position case for 18650 (3.7V) batteries with connection cables.

2-position case for 18650 (3.7V) batteries with connection cables.

4-position case for 18650 (3.7V) batteries with connection cables.

It can be used to increase maximal load of controller transistor output line
and for galvanic isolation between output line and load point.
The relay module can be used to control devices with high current consumption
through the OC outputs of alarm systems, recorders, etc.

It can be used to increase maximal load of controller transistor output line and for galvanic isolation between output line and load point.

SPECIFICATION
Number of relay outputs: 1 
Power supply: 10  ... 14 V DC
Current consumption: 20 mA (max) @ 12 V DC
Relay maximal load: 1 A (max), 30 V DC / 50 V AC (max)
Output: 1 x NO / NC
Operation temp: -10 °C ... 50 °C
Weight: 0.02 kg
Dimensions: 30  x 27  x 18 mm
Manufacturer / Brand: PULSAR

Micro SDHC with adapter
capacity 2GB
class 10
ultra fast performance
5 years warranty

AVR microcontrollerEEPROM: 1kBSRAM: 2kBFlash: 32kBDIP28
The product is also available per piece exclusively in our physical store.

Micro SDHC with adapter
capacity 32GB
class 10
ultra fast performance
5 years warranty

Ισχύς ( W) 10Wδυναμικό (V) 5VΑμπέρ ( Α) 2A

Card readerUSB A / Micro USB / Type-cMade of high quality materialUsed for: M2 / MicroSD / T-Flash cardColor: BlackType ExternalΤαχύτητα μεταφοράς (Mbps) 480υποστηριζόμενες κάρτες Micro SD T-Flash card

MCU: ATmega328Digital I/O: 14 (6 PWM)Analog Input: 8Flash Memory: 32 KB of which 2 KB used by bootloaderSRAM: 2 KBEEPROM: 1 KBClock Speed: 16 MHz

5110 LCD Module For Arduino UNO Mega Prototype

Number of relay outputs: 1Power supply: • 10 ... 16 V DC,Relay maximal load: 1 A (max) 30 V DC / 50 V AC (max)Output: 1 x NO/NCManufacturer / Brand: PULSARGuarantee: 2 years

Micro SDHC with adapter
capacity 64GB
class 10
ultra fast performance
5 years warranty

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

Microsd xc 64GBΧωρητικότητα 64GBΣχεδιασμένο για συστήματα καταγραφής (κάμερες ασφαλείας)συνεχόμενη λειτουργία καταγραφής μέχρι δύο χρόνιακατασκευαστής Western Digital

USB CH340 ICMicrocontroller:ATmega328POperating Voltage:5VDigital I/O Pins 14 (of which 6 provide PWM output)PWM Digital I/O Pins:6Analog Input Pins:6

The programmer enables, for example, saving your own program in the memory of the connected controller, or communication between the computer and the module via the USB port.
The interface is equipped with a dedicated place for the board, surrounded by spring pins. This solution ensures proper connection of the module pins with the goldpin connectors, at the same time allowing for secure, temporary assembly of the programmed module. An additional facilitation in programming and testing the module are the function buttons, thanks to which there is no need to manually short-circuit the appropriate pins of the module.
The programmer is powered from the USB port and does not require an external power supply.

Ethernet Shield, based on the Wiznet W5100 ChipSupported by the official Ethernet Library

The ESP32 programmer is a device that mediates data exchange between the computer (USB port) and modules based on the ESP8266EX chip. The programmer enables, for example, saving your own program in the memory of the connected controller, or communication between the computer and the module via the USB port.

Atmel Atmega2560 microcontrollerDigital I/O ports: 54Analog I/O ports: 16

Board for construction of electronic access control kit for educational purpose
Includes the board the PIC processor programmed
the socket for the iButton
and three iButtons
Capacity 30 iButton electronic keys