Home

Audio cable
Lenght: 1.2m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.2
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm

Audio cable
Lenght: 1m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.0
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm

Card readerUSB A / Micro USB / Type-cMade of high quality materialUsed for: M2 / MicroSD / T-Flash cardColor: BlackType ExternalΤαχύτητα μεταφοράς (Mbps) 480υποστηριζόμενες κάρτες Micro SD T-Flash card

Wireless bluetooth handsfreeBluetooth version V4.2Battery life Talk /music time - 6 HoursBattery - 55mAhOperating range - 10 metersSupport HSP,HFP,A2DP,AVRCR.Enjoy stereo music from stereo A2Embedded mic for hands-free conversation from BTS-enabled cell phonesVolume controlMultiple Pairing to 2 BT devicesCompatibility UniversalMicrophone YesAccesory type Bluetooth headphonesConnecting Single PointDesign In earColor - Black

Bluetooth receiver Earldom ET-M40, 3,5mm, FM TransmitterColor Black

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.