Home
There are 10 products.
Καλώδιο ήχου, Earldom, AUX21, υποδοχή 3.5mm, M / M, 1.2m
Audio cable
Lenght: 1.2m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.2
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm
Lenght: 1.2m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.2
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm
€2.20
Καλώδιο ήχου, Earldom AUX04, υποδοχή 3.5mm, M / M, 1.0m
Audio cable
Lenght: 1m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.0
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm
Lenght: 1m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.0
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm
€2.50
cart reader USB A / Micro USB / Type-c
Card readerUSB A / Micro USB / Type-cMade of high quality materialUsed for: M2 / MicroSD / T-Flash cardColor: BlackType ExternalΤαχύτητα μεταφοράς (Mbps) 480υποστηριζόμενες κάρτες Micro SD T-Flash card
€9.00
Bluetooth receiver ET-M40 3,5mm, black
Bluetooth receiver Earldom ET-M40, 3,5mm, FM TransmitterColor Black
€10.00
ESP32-ESP-WROOM-32 DEV-KIT-4
The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.
€16.00
ESP32-ESP-WROOM-32 ESP-32-DEVELOPMENT BOARD
The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.
€17.00