Home

Transistor: NPN; bipolar; 100V; 15A; 90W; TO247-3
The product is also available per piece exclusively in our physical store.

IC: digital; 8bit,shift register; THT; DIP14; Series: HCThe product is also available per piece exclusively in our physical store.

Transistor: N-MOSFET; unipolar; 100V; 80A; 260W; TO220AB
The product is also available per piece exclusively in our physical store.

Transistor: N-MOSFETunipolar 50V, 30A, 75WTO220ABThe product is also available per piece exclusively in our physical store.

Αντάπτορας USB to Micro USB
USB On The Go (OTG) Support
With this adapter you can connect flash memory, mouse, keyboard and other gadgets to your mobile device.
Χαρακτηριστικά
Accesory type Adapter
Color Silver

Supervisor Integrated Circuit; power on reset monitor (PoR)The product is also available per piece exclusively in our physical store.

for ibutton DS1990

IC: temperature sensor; digital thermometer; -55÷125°C; TO92; THTThe product is also available per piece exclusively in our physical store.

It can be used to increase maximal load of controller transistor output line and for galvanic isolation between output line and load point.

SPECIFICATION
Number of relay outputs: 1 
Power supply: 10  ... 14 V DC
Current consumption: 20 mA (max) @ 12 V DC
Relay maximal load: 1 A (max), 30 V DC / 50 V AC (max)
Output: 1 x NO / NC
Operation temp: -10 °C ... 50 °C
Weight: 0.02 kg
Dimensions: 30  x 27  x 18 mm
Manufacturer / Brand: PULSAR

Memory ROM64bit, 5msbutton 5mmserial2.8÷6VDCThe product is also available per piece exclusively in our physical store.

RTC circuit; I2C; NV SRAM; 56B; DIP8; 4.5÷5.5V
The product is also available per piece exclusively in our physical store.

Battery ID/Monitor ChipProvides unique 64-bit identification numberto battery packsOn-board A/D converter monitors batteryvoltage for end-of-charge and end-ofdischarge determinationEliminates thermistors by sensing batterytemperature on-chip256-bit nonvolatile user memory availablefor storage of data such as fuel gauge andmanufacturing information2-byte cycle counter
The product is also available per piece exclusively in our physical store.

Ηλεκτρονικό πολύμετρολειτουργεί με μπαταρία
ΜετράειΒολτ συνεχές έως 2000VΒολτ εναλλασσόμενο έως 750VΑμπέρ μόνο συνεχές έως 10Αmtranzistor NPN - PNPΑντίσταση έως 2000KΔίοδοΔιαθέτει Buzer συνέχειας αγωγούδιαθέτει έξοδο square wave

Metal extruder kit (extruder).
Compatible with:
Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-3 Max, CR-10, CR-10S

Handsfree Bluetooth Remax RB-T7Interface: Bluetooth 4.1Model: RB-T7Effective distance: 10 metersTalking time: 1.5-3.5 hoursStandby time: about 75-120 hoursCharging time: 2 hoursCompatibility UniversalMicrophone YesAccesory type Bluetooth headphonesConnecting Single PointDesign In earColor Black

Number of relay outputs: 1Power supply: • 10 ... 16 V DC,Relay maximal load: 1 A (max) 30 V DC / 50 V AC (max)Output: 1 x NO/NCManufacturer / Brand: PULSARGuarantee: 2 years

adapter for ibutton DS1990

Creality POM Models Plastic Disc, V-Groove Ball Bearing Pulley Passive Round Wheels Roller for Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S [Pack of 3]

Material: 100% Poly-lactic acid, PLA
Compatibility: Any 3D FDM printer using 175mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³

Material:100% Poly-lactic acid, PLA Compatibility:
Any 3D FDM printer using 1.75mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³
Filament diameter: 1.75mm
Weight: 1Kg

Portable karaoke speaker
Bluetooth version - V5.0
Power - 5W
Resistance - 2 Ohm
Battery capacity - 1200mAh
Charging port - Micro USB
Charging time - 3 hours
Music playback time - 1 hours
Standby time - 5 hours
LED Backlit
Microphone input port
Playback modes - Bluetooth, FM, USB, TF
Connecting Bluetooth
Key features Radio tuner
Material Plastic
Max. distance 10 m
Power supply voltage 5 V

Material:Thermoplastic Polyurethane (TPU)
Thread diameter: 1.75mm
Printing temperature: 210-240 °C
Net weight: 1 kg

Material:100% Poly-lactic acid, PLA Compatibility:
Any 3D FDM printer using 1.75mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³
Filament diameter: 1.75mm
Weight: 1Kg