Home

Transistor: NPN; bipolar; 100V; 15A; 90W; TO247-3
The product is also available per piece exclusively in our physical store.

IC: digital; 8bit,shift register; THT; DIP14; Series: HCThe product is also available per piece exclusively in our physical store.

Transistor: N-MOSFET; unipolar; 100V; 80A; 260W; TO220AB
The product is also available per piece exclusively in our physical store.

Transistor: N-MOSFETunipolar 50V, 30A, 75WTO220ABThe product is also available per piece exclusively in our physical store.

Supervisor Integrated Circuit; power on reset monitor (PoR)The product is also available per piece exclusively in our physical store.

for ibutton DS1990

IC: temperature sensor; digital thermometer; -55÷125°C; TO92; THTThe product is also available per piece exclusively in our physical store.

Memory ROM64bit, 5msbutton 5mmserial2.8÷6VDCThe product is also available per piece exclusively in our physical store.

RTC circuit; I2C; NV SRAM; 56B; DIP8; 4.5÷5.5V
The product is also available per piece exclusively in our physical store.

Battery ID/Monitor ChipProvides unique 64-bit identification numberto battery packsOn-board A/D converter monitors batteryvoltage for end-of-charge and end-ofdischarge determinationEliminates thermistors by sensing batterytemperature on-chip256-bit nonvolatile user memory availablefor storage of data such as fuel gauge andmanufacturing information2-byte cycle counter
The product is also available per piece exclusively in our physical store.

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

adapter for ibutton DS1990

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need