TIP3055 tranzistor
Transistor: NPN; bipolar; 100V; 15A; 90W; TO247-3
The product is also available per piece exclusively in our physical store.
The product is also available per piece exclusively in our physical store.
€1.50
Κατηγορία
Home
Δες τα προϊόντα, σύγκρινε επιλογές και χρησιμοποίησε τα φίλτρα για γρήγορη πλοήγηση.
There are 34 products.
74HC164 intecrate circuits
IC: digital; 8bit,shift register; THT; DIP14; Series: HCThe product is also available per piece exclusively in our physical store.
€1.66
IRF8010 mosfet
Transistor: N-MOSFET; unipolar; 100V; 80A; 260W; TO220AB
The product is also available per piece exclusively in our physical store.
The product is also available per piece exclusively in our physical store.
€2.20
BUZ11 mosfet
Transistor: N-MOSFETunipolar 50V, 30A, 75WTO220ABThe product is also available per piece exclusively in our physical store.
€2.30
FILALAB PLA FILAMENT 250gr 1.75 mm White
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€8.00
Automatic Battery Charger Ni-Cd / NiMH, MW-2168
Automatic Battery Charger Ni-Cd / NiMH, MW-2168
Input voltage: 230V AC 50/60Hz
Output voltage: 1.4-14V DC (10 elements) with automatic selection
Charging current: 50-80-120-180-240-300mA max (switch selectable)
Indications: Operation with LED
Suitable for:Charging Ni-Cd/Ni-MH batteries
Includes: X2-F01D, X2-01E cables, DC Connecrtors 5.5x2.5 mm
Dimensions: 95x85x60 mm
Weight: 0,24 kgr
Input voltage: 230V AC 50/60Hz
Output voltage: 1.4-14V DC (10 elements) with automatic selection
Charging current: 50-80-120-180-240-300mA max (switch selectable)
Indications: Operation with LED
Suitable for:Charging Ni-Cd/Ni-MH batteries
Includes: X2-F01D, X2-01E cables, DC Connecrtors 5.5x2.5 mm
Dimensions: 95x85x60 mm
Weight: 0,24 kgr
€12.00
POWER METER WITH LCD DISPLAY OR-WAT-419
The wattmeter allows you to check the electricity consumption and calculate the energy costs
of the connected device. It has a large LCD display and simple
configuration of the cost measurement setting.
of the connected device. It has a large LCD display and simple
configuration of the cost measurement setting.
€15.00
ISD1420 intecrate circuits
Single-Chip Voice Record/Playback Devices16- and 20-Second Durations28 PIN DIPThe product is also available per piece exclusively in our physical store.
€15.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Blue Lagoon
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Neon Green
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Khaki
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Lime Green
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Orange
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Green
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Yellow
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Blue
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Red
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Yellow
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm White
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Green
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Black
Out-of-Stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Bordeaux transparent
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€18.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Burgundy
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€18.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Violet
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€18.00