Home

Transistor: NPN; bipolar; 100V; 15A; 90W; TO247-3
The product is also available per piece exclusively in our physical store.

IC: digital; 8bit,shift register; THT; DIP14; Series: HCThe product is also available per piece exclusively in our physical store.

Transistor: N-MOSFET; unipolar; 100V; 80A; 260W; TO220AB
The product is also available per piece exclusively in our physical store.

Transistor: N-MOSFETunipolar 50V, 30A, 75WTO220ABThe product is also available per piece exclusively in our physical store.

It can be used to increase maximal load of controller transistor output line and for galvanic isolation between output line and load point.

SPECIFICATION
Number of relay outputs: 1 
Power supply: 10  ... 14 V DC
Current consumption: 20 mA (max) @ 12 V DC
Relay maximal load: 1 A (max), 30 V DC / 50 V AC (max)
Output: 1 x NO / NC
Operation temp: -10 °C ... 50 °C
Weight: 0.02 kg
Dimensions: 30  x 27  x 18 mm
Manufacturer / Brand: PULSAR

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Baseus L41 Type-C (input) for Type-C female connectors + 3.5 mm female connector adapters Black
You can connect 3.5mm jack cable and Type-C cable at the same time, you can listen
a music and charge your phone at the same time

Number of relay outputs: 1Power supply: • 10 ... 16 V DC,Relay maximal load: 1 A (max) 30 V DC / 50 V AC (max)Output: 1 x NO/NCManufacturer / Brand: PULSARGuarantee: 2 years

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need