Home

Transistor:N-MOSFET;unipolar;55V;27A;56W;TO220ABThe product is also available per piece exclusively in our physical store.

Transistor:N-MOSFET;unipolar;55V;64A;94W;TO220AB
The product is also available per piece exclusively in our physical store.

Anti-static Nylon Carbon Fiber Nipper
3 in 1: Fine tip tweezer, flat tip tweezer and curved fine tip tweezer
Adopt high quality nylon + carbon fiber, anti-static, antimagnetic, acid and alkali resistant and durable
Super hardness and high temperature resistance ( can work in the 250 Deg.C workplace )
The resistance coefficient is less than 10000 Ohm
Perfect weight and compact design for easy carry 
Available for repairing mainboard of laptops, mobile devices or other precision items like wristwatches, calculators etc.

Χαρακτηριστικά
For Electrician
Material Plastic
Σετ 3
Color Black

Easy one-handed use
Powerful suction for solder removal
Can quickly and effectively remove solder from a circuit board
Length: 200mm
Suction Force: 35hg/cm 
Χαρακτηριστικά
For Electrician
Material Metal
Σετ 1
Color Orange

This is gear grinding wire stripper / line clamp / wire cutter / plier. It is the simplest and fastest way to strip plastic or rubber insulation of single, multiple cables and wires. You just need to insert a wire into the jaws and squeeze the handles, now you're finished. The stripping diameter 0.6 - 2.5mm or 10 - 22 AWG. 
Multi-use 
It can be used as a wire cutter or plier, place the wire between cutter blades, close the handles fully and the wire was cut off, perfect for copper and aluminum wires, and you can use it to pull out nails too. With a lock to ensure your safety and high elasticity of the spring. No damaging to the conductor core, long lifetime, easy to carry......It is perfect for you!
Χαρακτηριστικά
For Electrician
Material Metal
Σετ 1
Color Black

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Clamp crimping tool jakemy CT4-3
RJ9 (4p / 4c)RJ11 (4p / 6p)RJ11 (6p / 6p)RJ12 (6p / 6p)RJ45 (8 / 8p)

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need