Home

Silicone USB-C to USB-C cable
Fast Charging
max output 60W
HOCO
model X101

Micro SDHC with adapter
capacity 2GB
class 10
ultra fast performance
5 years warranty

Micro SDHC with adapter
capacity 32GB
class 10
ultra fast performance
5 years warranty

Metal extruder kit (extruder).
Compatible with:
Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-3 Max, CR-10, CR-10S

The DAHUA C100 cards are the new generation of the data storage media, which offer high capacity, high transfer rate, high re-record-ability and perfect data protection.

The DAHUA C100 cards are the new generation of the data storage media, which offer high capacity, high transfer rate, high re-record-ability and perfect data protection.

Micro SDHC with adapter
capacity 64GB
class 10
ultra fast performance
5 years warranty

Creality POM Models Plastic Disc, V-Groove Ball Bearing Pulley Passive Round Wheels Roller for Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S [Pack of 3]

Single-Chip Voice Record/Playback Devices16- and 20-Second Durations28 PIN DIPThe product is also available per piece exclusively in our physical store.

30W Fast Charger with 4 charging ports
2 USB A
2 USB type C
Operating from 100 volts to 240 volts
Protection against overload, over voltage, over current, short circuit, fire, lightning
2 years warranty

Material: 100% Poly-lactic acid, PLA
Compatibility: Any 3D FDM printer using 175mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³

Material:100% Poly-lactic acid, PLA Compatibility:
Any 3D FDM printer using 1.75mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³
Filament diameter: 1.75mm
Weight: 1Kg

The DAHUA C100 cards are the new generation of the data storage media, which offer high capacity, high transfer rate, high re-record-ability and perfect data protection.

Material:Thermoplastic Polyurethane (TPU)
Thread diameter: 1.75mm
Printing temperature: 210-240 °C
Net weight: 1 kg

Material:100% Poly-lactic acid, PLA Compatibility:
Any 3D FDM printer using 1.75mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³
Filament diameter: 1.75mm
Weight: 1Kg

High quality SSD in 2.5" size. The high speed of read and write operations allows
to use it as sytem disk for daily work. Serial ATA interface connection.
The SSD-E800S128G is a second-generation disk, equipped with 3D TLC NAND Flash memory.

The common photosensitive LCD/DLP resin. It specializes in high precision, stable printing patterns and fast printing speed

Η κοινή φωτοευαίσθητη ρητίνη LCD/DLP. Ειδικεύεται στην υψηλή ακρίβεια, τα σταθερά μοντέλα εκτύπωσης και τη γρήγορη ταχύτητα εκτύπωσης.

BCM2835 processor (ARM11 @ 700MHz)
512MB SDRAM
4xUSB 2.0 ports
100BASE -TX Ethernet

Raspberry PI3 B+
architecture Cortex A53
Memory 1GB RAM
Communictions protocol Bluetooth 4.2, Bluetooth Low Energy, IEEE 802.11ac/b/g/n, WIFI
Processor BCM2837B0
Clock frequency 1.4GHz
Video coding H.264, OpenGL ES 1.1/2.0
Wi-Fi 2,4GHz, 5GHz
Dimensions 85x56mm