Home

Transistor: NPN; bipolar; 100V; 15A; 90W; TO247-3
The product is also available per piece exclusively in our physical store.

IC: digital; 8bit,shift register; THT; DIP14; Series: HCThe product is also available per piece exclusively in our physical store.

Audio cable
Lenght: 1.2m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.2
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm

Transistor: N-MOSFET; unipolar; 100V; 80A; 260W; TO220AB
The product is also available per piece exclusively in our physical store.

Transistor: N-MOSFETunipolar 50V, 30A, 75WTO220ABThe product is also available per piece exclusively in our physical store.

Audio cable
Lenght: 1m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.0
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Card readerUSB A / Micro USB / Type-cMade of high quality materialUsed for: M2 / MicroSD / T-Flash cardColor: BlackType ExternalΤαχύτητα μεταφοράς (Mbps) 480υποστηριζόμενες κάρτες Micro SD T-Flash card

Bluetooth receiver Earldom ET-M40, 3,5mm, FM TransmitterColor Black

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need