Αρχική
Φιλτράρισμα κατά
Διαθεσιμότητα
Διαθεσιμότητα
Μάρκα
Μάρκα
Βάρος
Βάρος
Τιμή
Τιμή
ΠΡΟΤΑΣΗ
Υπολογιστές
Special Products
Αρχική
Υπάρχουν 53 προϊόντα.
EL817C optocupler
Σε απόθεμα
Optocoupler; THT; Channels: 1; Out: transistor; Uinsul: 5kV; Uce: 35VΤο προϊόν διατίθεται και ανά τεμάχιο αποκλειστικά στο φυσικό μας κατάστημα.
1,12 €
ICL232 CPE intecrate circuits
Σε απόθεμα
IC: interface; transceiver; RS232,full duplex; 120kbps; DIP16
Το προϊόν διατίθεται και ανά τεμάχιο αποκλειστικά στο φυσικό μας κατάστημα.
Το προϊόν διατίθεται και ανά τεμάχιο αποκλειστικά στο φυσικό μας κατάστημα.
6,00 €
FILALAB PLA 250gr 1.75 mm Grey
Χωρίς απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
8,00 €
FILALAB PLA 250gr 1.75 mm Red
Χωρίς απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
8,00 €
FILALAB PLA 250gr 1.75 mm Green
Χωρίς απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
8,00 €
FILALAB PLA 250gr 1.75 mm White
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
8,00 €
FILALAB PLA 250gr 1.75 mm Yellow
Χωρίς απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
8,00 €
FILALAB PLA 250gr 1.75 mm Blue
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
8,00 €
FILALAB PLA 250gr 1.75 mm Black
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
8,00 €
ΑΝΙΧΝΕΥΤΗΣ ΕΝΑΛΑΣΟΜΕΝΗΣ ΤΑΣΗΣ UT12D
Σε απόθεμα
Search for similarAC voltage range: 24 V AC ... 1000 V ACWorking frequency band: 50 Hz ... 60 Hz
10,00 €
UNI-T Aντάπτορας Έλεγχου πρίζας UT07A
Τελευταία προϊόντα σε απόθεμα
Ονομαστικό ρεύμα: 10 AΟνομαστική τάση: 230 V ACΛειτουργικό ρεύμα: <18 mARCD: περίπου 30 mAπιστοποίηση: CEΕπίπεδο ασφάλειας: CAT II 300VΤροφοδοσία: 230 V ACΓια Έλεγχος πρίζας σουκο
14,00 €
Uni-T UT681L Tester Καλωδίων Δικτύου
Σε απόθεμα
Δοκιμαστικό Tester Καλωδίων Δικτύου RJ45 - RJ11 UNI-T UT681L
για τον έλεγχο καλωδιώσεων δικτύου υπολογιστών Ethernet RJ-45 και τηλεφωνικών γραμμών RJ-11
για τον έλεγχο καλωδιώσεων δικτύου υπολογιστών Ethernet RJ-45 και τηλεφωνικών γραμμών RJ-11
15,00 €
FILALAB PETG 1kg 1.75 mm Blue Lagoon
Σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
17,00 €
FILALAB PETG 1kg 1.75 mm Neon Green
Σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
17,00 €
FILALAB PETG 1kg 1.75 mm Khaki
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
17,00 €
FILALAB PLA 1kg 1.75 mm Brown
Χωρίς απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
17,00 €
FILALAB PLA 1kg 1.75 mm Beige
Χωρίς απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
17,00 €
FILALAB PLA 1kg 1.75 mm Lime Green
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
17,00 €
FILALAB PETG 1kg 1.75 mm Orange
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
17,00 €
FILALAB PETG 1kg 1.75 mm Green
Σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
17,00 €
FILALAB PETG 1kg 1.75 mm Yellow
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
17,00 €
FILALAB PETG 1kg 1.75 mm Blue
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
17,00 €
FILALAB PLA 1kg 1.75 mm Galaxy Black (no RAL)
Χωρίς απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
17,00 €
FILALAB PLA 1kg 1.75 mm Red - FILALAB
Τελευταία προϊόντα σε απόθεμα
MADE IN EUROPE
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
17,00 €