BANANA BPI-UNO32 with ESP32 for webduino & arduino
The Banana Pi BPI-UNO32 is a small computer board shaped like an Arduino Uno. It uses the fast ESP32 chip. It has built-in Wi-Fi and Bluetooth. You can use the familiar Arduino IDE software to write code
Key Features
- Brain: Xtensa 32-bit processor. It works at 240 MHz. Think of this as a car engine. It runs tasks very fast.
- Memory: It has 520 KB of internal storage. This is used for your active commands. It also has 4 MB of flash memory for saving your programs.
- Pins: It has digital and analog pins. You can plug in sensors, lights, and motors here.
- Wireless: It connects to 2.4 GHz Wi-Fi and Bluetooth.
Δεν είσαι σίγουρος; Ρώτησέ μας πριν την αγορά για συμβατότητα.
Ασφαλής αγορά Πολλαπλοί τρόποι πληρωμής και αποστολής.
Υποστήριξη πελάτη Καθαρή πληροφορία για εύκολη επιλογή.
local_shipping Δωρεάν μεταφορικά για προϊόντα πάνω από 90.00 € και έως 2 κιλά.
The Banana Pi BPI-UNO32 is a small computer board shaped like an Arduino Uno. It uses the fast ESP32 chip. It has built-in Wi-Fi and Bluetooth. You can use the familiar Arduino IDE software to write code
Key Features
- Brain: Xtensa 32-bit processor. It works at 240 MHz. Think of this as a car engine. It runs tasks very fast.
- Memory: It has 520 KB of internal storage. This is used for your active commands. It also has 4 MB of flash memory for saving your programs.
- Pins: It has digital and analog pins. You can plug in sensors, lights, and motors here.
- Wireless: It connects to 2.4 GHz Wi-Fi and Bluetooth.
How to use it
It works just like an Arduino Uno. You plug it into your computer with a USB cord. You type your code into the computer. Then, you "upload" the code to the board.
A microcontroller board needs code to do things. Think of the board like a blank puzzle. The code is the picture. Without it, nothing happens.
Because it has Wi-Fi, you can use it for Internet of Things (IoT) projects. This means you can control lights from your phone. You can also send sensor data to a website. It works with many coding tools. These include Webduino, Arduino, and MicroPython
ESP-WROOM-32
448KB ROM
520KB RAM
Wi-Fi&BLE
| GPIO Pin Name | Function |
| 16 | GPIO16, HS1_DATA4, U2RXD, EMAC_CLK_OUT |
| 17 | GPIO17, HS1_DATA5, U2TXD, EMAC_CLK_OUT_180 |
| EN | Chip-enable signal. Active high |
| 3V3 | 3V3 DC Power Out |
| 5V | 5V DC Power Out |
| GND | Ground |
| GND | Ground |
| VIN | DC Power In |
| 36/A0 | GPIO36, SENSOR_VP, ADC_H, ADC1_CH0, RTC_GPIO0 |
| 39/A3 | GPIO39, SENSOR_VN, ADC1_CH3, ADC_H, RTC_GPIO3 |
| 32/A4 | GPIO32, XTAL_32K_P (32.768 kHz crystal oscillator input), ADC1_CH4,TOUCH9, RTC_GPIO9 |
| 33/A5 | GPIO33, XTAL_32K_N (32.768 kHz crystal oscillator output), ADC1_CH5,TOUCH8, RTC_GPIO8 |
| 34/A6 | GPIO34, ADC1_CH6, RTC_GPIO4 |
| 35/A7 | GPIO35, ADC1_CH7, RTC_GPIO5 |
| 22/SCL | GPIO22, VSPIWP, U0RTS, EMAC_TXD1 |
| 21/SDA | GPIO21, VSPIHD, EMAC_TX_EN |
| 27 | GPIO27, ADC2_CH7, TOUCH7, RTC_GPIO17, EMAC_RX_DV |
| GND | Ground |
| 18/SCK | GPIO18, VSPICLK, HS1_DATA7 |
| 19/MISO | GPIO19, VSPIQ, U0CTS, EMAC_TXD0 |
| 23/MOSI | GPIO23, VSPID, HS1_STROBE |
| 05/SS | GPIO5, VSPICS0, HS1_DATA6, EMAC_RX_CLK |
| 26/DA2 | GPIO26, DAC_2, ADC2_CH9, RTC_GPIO7, EMAC_RXD1 |
| 25/DA1 | GPIO25, DAC_1, ADC2_CH8, RTC_GPIO6, EMAC_RXD0 |
| 14/SCK | GPIO14, ADC2_CH6, TOUCH6, RTC_GPIO16, MTMS, HSPICLK,HS2_CLK, SD_CLK, EMAC_TXD2 |
| 12/MISO | GPIO12, ADC2_CH5, TOUCH5, RTC_GPIO15, MTDI, HSPIQ,HS2_DATA2, SD_DATA2, EMAC_TXD3 |
| 13/MOSI | GPIO13, ADC2_CH4, TOUCH4, RTC_GPIO14, MTCK, HSPID,HS2_DATA3, SD_DATA3, EMAC_RX_ER |
| 15/SS | GPIO15, ADC2_CH3, TOUCH3, MTDO, HSPICS0, RTC_GPIO13,HS2_CMD, SD_CMD, EMAC_RXD3 |
| 04 | GPIO4, ADC2_CH0, TOUCH0, RTC_GPIO10, HSPIHD, HS2_DATA1,SD_DATA1, EMAC_TX_ER |
| 02 | GPIO2, ADC2_CH2, TOUCH2, RTC_GPIO12, HSPIWP, HS2_DATA0,SD_DATA0 |
| 01->TX | GPIO1, U0TXD, CLK_OUT3, EMAC_RXD2 |
| 03<-RX | GPIO3, U0RXD, CLK_OUT2 |
| VCC | 3V3 DC Power Out |
| GND | Ground |
| SCL | GPIO22, VSPIWP, U0RTS, EMAC_TXD1 |
| SDA | GPIO21, VSPIHD, EMAC_TX_EN |
9 άλλα προϊόντα στην ίδια κατηγορία:




