Home

Transistor: NPN; bipolar; 100V; 15A; 90W; TO247-3
The product is also available per piece exclusively in our physical store.

IC: digital; 8bit,shift register; THT; DIP14; Series: HCThe product is also available per piece exclusively in our physical store.

Transistor: N-MOSFET; unipolar; 100V; 80A; 260W; TO220AB
The product is also available per piece exclusively in our physical store.

Transistor: N-MOSFETunipolar 50V, 30A, 75WTO220ABThe product is also available per piece exclusively in our physical store.

Ηλεκτρονικό πολύμετρολειτουργεί με μπαταρία
ΜετράειΒολτ συνεχές έως 2000VΒολτ εναλλασσόμενο έως 750VΑμπέρ μόνο συνεχές έως 10Αmtranzistor NPN - PNPΑντίσταση έως 2000KΔίοδοΔιαθέτει Buzer συνέχειας αγωγούδιαθέτει έξοδο square wave

Baseus L41 Type-C (input) for Type-C female connectors + 3.5 mm female connector adapters Black
You can connect 3.5mm jack cable and Type-C cable at the same time, you can listen
a music and charge your phone at the same time

Wireless bluetooth handsfreeBluetooth version V4.2Battery life Talk /music time - 6 HoursBattery - 55mAhOperating range - 10 metersSupport HSP,HFP,A2DP,AVRCR.Enjoy stereo music from stereo A2Embedded mic for hands-free conversation from BTS-enabled cell phonesVolume controlMultiple Pairing to 2 BT devicesCompatibility UniversalMicrophone YesAccesory type Bluetooth headphonesConnecting Single PointDesign In earColor - Black

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

BCM2835 processor (ARM11 @ 700MHz)
512MB SDRAM
4xUSB 2.0 ports
100BASE -TX Ethernet

Raspberry PI3 B+
architecture Cortex A53
Memory 1GB RAM
Communictions protocol Bluetooth 4.2, Bluetooth Low Energy, IEEE 802.11ac/b/g/n, WIFI
Processor BCM2837B0
Clock frequency 1.4GHz
Video coding H.264, OpenGL ES 1.1/2.0
Wi-Fi 2,4GHz, 5GHz
Dimensions 85x56mm