Active filters

EL817C optocupler
Optocoupler; THT; Channels: 1; Out: transistor; Uinsul: 5kV; Uce: 35VThe product is also available per piece exclusively in our physical store.
€1.12
ICL232 CPE intecrate circuits
IC: interface; transceiver; RS232,full duplex; 120kbps; DIP16The product is also available per piece exclusively in our physical store.
€6.00
Bluetooth handsfree Moveteck CT986
Wireless bluetooth handsfreeBluetooth version V4.2Battery life Talk /music time - 6 HoursBattery - 55mAhOperating range - 10 metersSupport HSP,HFP,A2DP,AVRCR.Enjoy stereo music from stereo A2Embedded mic for hands-free conversation from BTS-enabled cell phonesVolume controlMultiple Pairing to 2 BT devicesCompatibility UniversalMicrophone YesAccesory type Bluetooth headphonesConnecting Single PointDesign In earColor - Black
€10.00
ESP32-ESP-WROOM-32 DEV-KIT-4
The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.
€16.00
ESP32-ESP-WROOM-32 ESP-32-DEVELOPMENT BOARD
The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.
€17.00