Home

It can be used to increase maximal load of controller transistor output line and for galvanic isolation between output line and load point.

SPECIFICATION
Number of relay outputs: 1 
Power supply: 10  ... 14 V DC
Current consumption: 20 mA (max) @ 12 V DC
Relay maximal load: 1 A (max), 30 V DC / 50 V AC (max)
Output: 1 x NO / NC
Operation temp: -10 °C ... 50 °C
Weight: 0.02 kg
Dimensions: 30  x 27  x 18 mm
Manufacturer / Brand: PULSAR

Autonomous door-window alarm, loud siren, easy programming of four-digit code,
when the alarm is not armed it can also operate your door opening alarm.
It works with a simple 9V battery. NOT INCLUDED IN THE PACKAGE

Number of relay outputs: 1Power supply: • 10 ... 16 V DC,Relay maximal load: 1 A (max) 30 V DC / 50 V AC (max)Output: 1 x NO/NCManufacturer / Brand: PULSARGuarantee: 2 years

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

BCM2835 processor (ARM11 @ 700MHz)
512MB SDRAM
4xUSB 2.0 ports
100BASE -TX Ethernet

Raspberry PI3 B+
architecture Cortex A53
Memory 1GB RAM
Communictions protocol Bluetooth 4.2, Bluetooth Low Energy, IEEE 802.11ac/b/g/n, WIFI
Processor BCM2837B0
Clock frequency 1.4GHz
Video coding H.264, OpenGL ES 1.1/2.0
Wi-Fi 2,4GHz, 5GHz
Dimensions 85x56mm