Home

Speed Flash
4GB Κάρτα Μνήμης Micro SD 
class 6
5 years warranty

Input: Input: 100-240VAC 50/60HZ 0.6A Max
Output TYPE-C: DC 5V/3A 9V/2.77A 12V/2.08A
PPS: 3.3-5.9V /3.0A (9.9-17.7W), 3.3-11.0V/2.25A (7.4-24.75W)
European plug;
Material: ABS+PC
Protection circuit: over current and short circuit protection
Protocol support: Apple Mode2.4, QC2.0, QC3.0, DCP, QC4.0+, huawei-SCP, PD2.0, PD3.0, PPS (24.75W)
Weight: 45g±2g
Size: European standard 77.5*41 *26 mm length*width*height

The wattmeter allows you to check the electricity consumption and calculate the energy costs
of the connected device. It has a large LCD display and simple
configuration of the cost measurement setting.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.