Home

Transistor: PNP; bipolar; 80V; 1.5A; 12W; SOT32
The product is also available per piece exclusively in our physical store.

Transistor: PNP; bipolar; 80V; 1.5A; 12W; SOT32The product is also available per piece exclusively in our physical store.

Transistor: PNP; bipolar; 80V; 1.5A; 12W; SOT32
The product is also available per piece exclusively in our physical store.

Transistor: PNP; bipolar; 80V; 1.5A; 12W; SOT32The product is also available per piece exclusively in our physical store.

Transistor: NPNbipolar250V1A40WTO220ABThe product is also available per piece exclusively in our physical store.

Transistor: PNPbipolar60V3A40WTO220-3The product is also available per piece exclusively in our physical store.

IC: voltage reference source; 2.495V; ±1%; 100mA; TO92; Ammo PackThe product is also available per piece exclusively in our physical store.

Transistor: NPN; bipolar; 60V; 3A; 40W; TO220ABThe product is also available per piece exclusively in our physical store.

IC: analog switch; demultiplexer/multiplexer,switch; Channels: 1The product is also available per piece exclusively in our physical store.

C: digital; static shift register; CMOS; DIP16The product is also available per piece exclusively in our physical store.

PNP Transistor 25A 100V SOT-93The product is also available per piece exclusively in our physical store.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

Transistor: NPN; bipolar; RF; 17V; 2A; 12.5W; TO220; Pout: 7W
The product is also available per piece exclusively in our physical store.

BCM2835 processor (ARM11 @ 700MHz)
512MB SDRAM
4xUSB 2.0 ports
100BASE -TX Ethernet

Raspberry PI3 B+
architecture Cortex A53
Memory 1GB RAM
Communictions protocol Bluetooth 4.2, Bluetooth Low Energy, IEEE 802.11ac/b/g/n, WIFI
Processor BCM2837B0
Clock frequency 1.4GHz
Video coding H.264, OpenGL ES 1.1/2.0
Wi-Fi 2,4GHz, 5GHz
Dimensions 85x56mm