Home

Supervisor Integrated Circuit; power on reset monitor (PoR)The product is also available per piece exclusively in our physical store.

for ibutton DS1990

IC: temperature sensor; digital thermometer; -55÷125°C; TO92; THTThe product is also available per piece exclusively in our physical store.

Memory ROM64bit, 5msbutton 5mmserial2.8÷6VDCThe product is also available per piece exclusively in our physical store.

RTC circuit; I2C; NV SRAM; 56B; DIP8; 4.5÷5.5V
The product is also available per piece exclusively in our physical store.

Battery ID/Monitor ChipProvides unique 64-bit identification numberto battery packsOn-board A/D converter monitors batteryvoltage for end-of-charge and end-ofdischarge determinationEliminates thermistors by sensing batterytemperature on-chip256-bit nonvolatile user memory availablefor storage of data such as fuel gauge andmanufacturing information2-byte cycle counter
The product is also available per piece exclusively in our physical store.

adapter for ibutton DS1990

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.