Home

Optocoupler; THT; Channels: 1; Out: transistor; Uinsul: 5kV; Uce: 35VThe product is also available per piece exclusively in our physical store.

Transistor:N-MOSFET;unipolar;60V;36A;150W;TO220AB
The product is also available per piece exclusively in our physical store.

Metal extruder kit (extruder).
Compatible with:
Ender-3, Ender-3 Pro, Ender-3S, Ender-3 V2, Ender-3 Max, CR-10, CR-10S

Creality POM Models Plastic Disc, V-Groove Ball Bearing Pulley Passive Round Wheels Roller for Ender 3, Ender 3 Pro, Ender 5, CR-10, CR-10S [Pack of 3]

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

Material: 100% Poly-lactic acid, PLA
Compatibility: Any 3D FDM printer using 175mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

Material:100% Poly-lactic acid, PLA Compatibility:
Any 3D FDM printer using 1.75mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³
Filament diameter: 1.75mm
Weight: 1Kg

Material:Thermoplastic Polyurethane (TPU)
Thread diameter: 1.75mm
Printing temperature: 210-240 °C
Net weight: 1 kg

Material:100% Poly-lactic acid, PLA Compatibility:
Any 3D FDM printer using 1.75mm filament
Base temperature: 45-55ºC
Printing temperature range: 190-220ºC
Density: 1.25 g/cm³
Filament diameter: 1.75mm
Weight: 1Kg

The common photosensitive LCD/DLP resin. It specializes in high precision, stable printing patterns and fast printing speed

Η κοινή φωτοευαίσθητη ρητίνη LCD/DLP. Ειδικεύεται στην υψηλή ακρίβεια, τα σταθερά μοντέλα εκτύπωσης και τη γρήγορη ταχύτητα εκτύπωσης.