Home

Connection mode: 2.4 GHz USB receiver
Sensor - Pixart 3065
Sensor type: Optical
Number of buttons: 4
Resolution: 800/1200/1600 DPI
Button life cycle: 3 million clicks
Battery: AA*1
Διαστάσεις:110*62*37mm
Transmission range: approx: 10m

Designed to provide finger support during daily work (for right-handed people).
Particularly elegant and convenient and with a sensor created by Pixart, it allows operation even on smooth surfaces.
It connects wirelessly at 2.4 GHz via the USB receiver and ensures uninterrupted communication with the computer.
It has 4 durable buttons which can withstand up to 3 million clicks.
- Connection: 2.4 GHz wireless USB 
1600 dpi

• Complete DTMF Receiver• Low power consumption• Internal gain setting amplifier• Adjustable guard time• Central office quality• Power-down mode• Inhibit mode• Backward compatible withMT8870C/MT8870C-1The product is also available per piece exclusively in our physical store.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

Central office quality DTMF transmitter/receiver• Low power consumption• High speed Intel micro interface• Adjustable guard time• Automatic tone burst mode• Call progress tone detection to -30dBmThe product is also available per piece exclusively in our physical store.

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.