Home

Impedance 32 Ohm
Cable lenght (M) 1.6
Frequency response (Hz) 20 ~ 20 000
Microphone Yes
Design Over the ear
Type Standart
Color RED
Τεχνολογιες With cable

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

Bluetooth headset
Connectivity - Bluetooth, SD, FM
Bluetooth version - V5.0
Driver unit - Ø40mm
Impedance - 32Ω
Sensitivity - 112dB±3dB
Frequency response - 20Hz~20,000Hz
Transmit range - up to 10 meters
Working time - 5 hours
Battery capacity - 200mAh
Color - Black, Red, Blue, Gray
Χαρακτηριστικά
Battery life 5 hours talking time
Compatibility Universal
Working range 10 m
Microphone Yes
Accesory type Bluetooth headphones
Bluetooth Version 5.0
Connecting Single Point
Design Over the ear
Color Different colors

Bluetooth headset
Connectivity - Bluetooth, SD, FM
Bluetooth version - V5.0
Driver unit - Ø40mm
Impedance - 32Ω
Sensitivity - 112dB±3dB
Frequency response - 20Hz~20,000Hz
Transmit range - up to 10 meters
Working time - 5 hours
Battery capacity - 200mAh
Color - Black, Red, Blue, Gray
Χαρακτηριστικά
Battery life 5 hours talking time
Compatibility Universal
Working range 10 m
Microphone Yes
Accesory type Bluetooth headphones
Bluetooth Version 5.0
Connecting Single Point
Design Over the ear
Color Different colors

The ESP32-ESP-WROOM-32 development kit is an ideal kit for learning how to program the ESP-WROOM-32 module and testing its capabilities. One board contains the above-mentioned communication module / micro-controller, a USB -> UART interface based on the CP2102 chip, buttons that facilitate switching the device to programming mode and a voltage converter thanks to which the whole thing is powered directly from the micro USB connector. In addition, all pins of the ESP-WROOM module are provided as goldpin connectors, so the module can be used with any breadboard without the need for soldering. The device allows you to use Wi-Fi (802.1 b/g/n), Bluetooth / Bluetooth LE protocols and, if necessary, your own protocols written by the user.

Nominal voltage (line-line): 120 VMaximal voltage (line-line): 150 VSockets type: RJ11 (6P4C)Guarantee: 2 years