Home

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Ηλεκτρονικό πολύμετρολειτουργεί με μπαταρία
ΜετράειΒολτ συνεχές έως 2000VΒολτ εναλλασσόμενο έως 750VΑμπέρ μόνο συνεχές έως 10Αmtranzistor NPN - PNPΑντίσταση έως 2000KΔίοδοΔιαθέτει Buzer συνέχειας αγωγούδιαθέτει έξοδο square wave

• Complete DTMF Receiver• Low power consumption• Internal gain setting amplifier• Adjustable guard time• Central office quality• Power-down mode• Inhibit mode• Backward compatible withMT8870C/MT8870C-1The product is also available per piece exclusively in our physical store.

Central office quality DTMF transmitter/receiver• Low power consumption• High speed Intel micro interface• Adjustable guard time• Automatic tone burst mode• Call progress tone detection to -30dBmThe product is also available per piece exclusively in our physical store.

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need

Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need

BCM2835 processor (ARM11 @ 700MHz)
512MB SDRAM
4xUSB 2.0 ports
100BASE -TX Ethernet

Raspberry PI3 B+
architecture Cortex A53
Memory 1GB RAM
Communictions protocol Bluetooth 4.2, Bluetooth Low Energy, IEEE 802.11ac/b/g/n, WIFI
Processor BCM2837B0
Clock frequency 1.4GHz
Video coding H.264, OpenGL ES 1.1/2.0
Wi-Fi 2,4GHz, 5GHz
Dimensions 85x56mm