Κατηγορία
Home
Δες τα προϊόντα, σύγκρινε επιλογές και χρησιμοποίησε τα φίλτρα για γρήγορη πλοήγηση.
There are 34 products.
Καλώδιο ήχου, Earldom, AUX21, υποδοχή 3.5mm, M / M, 1.2m
Audio cable
Lenght: 1.2m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.2
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm
Lenght: 1.2m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.2
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm
€2.20
Καλώδιο ήχου, Earldom AUX04, υποδοχή 3.5mm, M / M, 1.0m
Audio cable
Lenght: 1m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.0
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm
Lenght: 1m
Color: Black, White
3.5mm
Χαρακτηριστικά
Μηκος (m) 1.0
Accesory type Cable
Connector type 1 3.5mm
Connector type 2 3.5mm
€2.50
Lithium Battery CR1220
Last items in stock
€5.00
FILALAB PLA FILAMENT 250gr 1.75 mm White
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€8.00
cart reader USB A / Micro USB / Type-c
Card readerUSB A / Micro USB / Type-cMade of high quality materialUsed for: M2 / MicroSD / T-Flash cardColor: BlackType ExternalΤαχύτητα μεταφοράς (Mbps) 480υποστηριζόμενες κάρτες Micro SD T-Flash card
€9.00
Bluetooth receiver ET-M40 3,5mm, black
Bluetooth receiver Earldom ET-M40, 3,5mm, FM TransmitterColor Black
€10.00
ISD1420 intecrate circuits
Single-Chip Voice Record/Playback Devices16- and 20-Second Durations28 PIN DIPThe product is also available per piece exclusively in our physical store.
€15.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Blue Lagoon
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Neon Green
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Khaki
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Lime Green
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Orange
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Green
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Yellow
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PETG FILAMENT 1 kg 1.75 mm Blue
Last items in stock
Printing setup
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
Nozzle temp. – 240° C – 260° C
Bed temp. – 75° C – 90° C
Fan – 0% – 50%
Printing speed – 50 mm/s -100 mm/s
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Red
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00
FILALAB PLA FILAMENT 1 kg 1.75 mm Yellow
Last items in stock
Printing setup
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
Nozzle temp. – 190° C – 210° C
Bed temp. – 40° C – 60° C
Fan – 50% – 100 %
Printing speed – 100 mm/s or more
Enclosure – No need
€17.00